Eight-axis intelligent spray paint machine designed with 3 spray guns

X-axis slide table 1 set

High-quality large-scale 180MM wide high-speed electric slide, left and right horizontal spraying, effective stroke area: within 1800MM, using 1500W servo motor, the maximum transmission speed can reach 1.8M/S; (stable high-speed operation, long service life)

Y-axis slide table 2 sets

High-quality large-scale 180MM high-speed electric slide, front and rear longitudinal spraying, effective area: within 1300MM, using 1000W servo motor with reducer, the maximum transmission speed can reach 1.2M/S; two sets of electric slides, one set of servo motor; (high-speed operation Stable and long service life)

Z-axis slide table 1 set. The slide table structure moves up and down. The effective stroke is within 600MM. It adopts 750W high-speed servo brake motor. The maximum transmission speed can reach 1M/S. It can output 3 sets of automatic spray guns.

P axis rotation 1 set out 3

1：P-axis rotation (up, down, left, right, front and back rotation, around the X-axis direction), high-speed servo motor acceleration and deceleration, matching driver, range: 0-360 degrees, adjustable at any angle; workpiece position spacing: 650MM; 3 groups are sprayed at the same time (1 Group spray meter (3 groups); maximum transmission speed 360°/S

2：With vacuum suction cup function

R axis device Two sets

R axis unit (workpiece shaft swinging up and down, around H axis) 0-90 degrees, using 1000W high-speed servo motor reducer, each plate can carry <= 15 KG; the highest transmission speed 360 / S, W shaft for three groups, the workpiece 0-90 degrees, the joint spraying Three groups of workpiece positions swing up and down at the same time, combined with the spray gun action

W axis device Two sets

W axis unit (horizontal rotation, around Z axis direction) rotates 360 degrees, each plate can carry <= 20 KG; the highest transmission speed is 360 / S and W axis is two groups, and the workpiece is 360 degrees

8-axis 4-position intelligent spray painting equipment

Applicable scene:

Washbasins, lampshades, casters, trash cans, door locks, doorhandles, ceramic tea cups, computer host casings, thermos kettles,stereos, plastic hardware products, etc.

 Advantage:

1. The 8-axis equipment can tilt the work station forward, and the paint mist sprayed on the bottom of the workpiece will not rebound, and the product quality is more guaranteed.

2. It can be replaced by pendulum spraying, and the 500*600 screen can be sprayed 3pcs at the same time, spray painting efficiency is higher

3. The equipment is more versatile, and can spray both special-shaped parts and difficult-to-spray parts with one equipment

Spraying process principle and characteristics: spray gun can be in the scope of XYZ linear movement and spray gun Angle can be 0~270 degrees around the X axis direction, the machine along the X axis direction reciprocating, along the Y axis direction or continuous advance, through the work plate for 90 degrees or other Angle, the product reciprocating spraying, complete plane cross cover and all-round paint, programming operation is simple, password protection control function, convenient management

Membrane thickness and range control:1. Spray thickness 10-40 UM (can be adjusted by controller program and machine) 2. Spray range: single disk 500 * 1000MM. Double disk support 600 * 600MM, three strings or single station diagonal below 630MM

The frame is made of stainless steel 100 * 100MM welding 2. Mechanical size: W2800 * L2200 * H2100, Z axis up to the highest, need 2400MM